So far we have studied angles as parts of triangles, but we can also use angles to describe rotation. For example, think of the minute hand on a clock. Every hour, the minute hand moves through one complete rotation, or \(360\degree\text{.}\) In two hours, the minute hand rotates through \(720\degree\text{.}\)
The volume control on an amplifier is a dial with ten settings, as shown at right. Through how many degrees would you rotate the dial to increase the volume level from 0 to 7?
The degree measure of an angle depends only on the fraction of a whole rotation between its sides, and not on the location or position of the angle. To compare and analyze angles, we place them in standard position, so that the vertex of the angle is located at the origin and its initial side lies on the positive \(x\)-axis. If the terminal side rotates counter-clockwise, the degree measure of the angle is positive; it is negative if the terminal side rotates clockwise. The figure below shows four angles and how each appears in standard position.
One-half a complete revolution is \(180\degree\text{,}\) and three-quarters of one revolution is \(270\degree\text{.}\) Thus, for angles between \(180\degree\) and \(270\degree\) in standard position, the terminal side lies in the third quadrant, and for angles between \(270\degree\) and \(360\degree\text{,}\) the terminal side lies in the fourth quadrant.
In Chapter 3 we defined the sine, cosine, and tangent for obtuse angles by placing the angle in a Cartesian coordinate system. We can do the same for angles that represent rotations.
First, we place the angle \(\theta\) in standard position, with its vertex at the origin. We picture the terminal side sweeping counter-clockwise around a circle to form the angle.
Next, we choose a point \(P\) with coordinates \((x,y)\) on the terminal side, as shown at right. The distance from the origin to \(P\) is then \(r = \sqrt{x^2 + y^2}\text{.}\) The trigonometric ratios of \(\theta\) are defined as follows.
We can choose any point on the terminal side of the angle, and the trig ratios defined by its coordinates will be the same. (Can you explain why? Think about similar triangles.) And, as we noted when we first defined the trig ratios, they are functions of the input angle, so there is only one sine, cosine, or tangent for a given angle.
The notation \(\sin(\theta)\) is read "sine of theta," just as we say "f of x" for \(f(x)\text{.}\) The parentheses do not mean multiplication, but rather tell us to apply the function.
Because it is the distance from the origin to \(P\text{,}\)\(r\) is always positive. However, \(x\) and \(y\) can be positive or negative (or zero), depending on the angle \(\theta\text{.}\) For example, in the second quadrant, \(x\) is negative but \(y\) is positive, so the cosine and the tangent of angles between \(90\degree\) and \(180\degree\) are negative, but their sines are positive.
a. In standard position, the terminal side of an angle of \(200\degree\) lies in the third quadrant. (See figure (a) below.) In the third quadrant, \(x \lt 0\) and \(y \lt 0\text{,}\) but \(r \gt 0\text{.}\) Thus, \(\sin (200\degree)\) is negative, \(\cos (200\degree)\) is negative, and \(\tan (200\degree)\) is positive.
b. The terminal side of \(300\degree\) lies in the fourth quadrant, so \(x \gt 0\) and \(y \lt 0\text{,}\) and \(r \gt 0\text{.}\) Thus, \(\sin (300\degree)\) is negative, \(\cos (300\degree)\) is positive, and \(\tan (300\degree)\) is negative.
In Section 3.1 we learned that the trig ratios for angles in the second quadrant are the same as the trig ratios for their supplements, except for sign. For example, you can use your calculator to verify that
The trig ratios for \(130\degree\) and \(50\degree\) have the same absolute value because the two triangles formed by the angles are congruent, as shown above.
The trig ratios for angles between \(180\degree\) and \(360\degree\text{,}\) whose terminal sides lie in the third and fourth quadrants, are also related to the trig ratios of familiar angles in the first quadrant. We "refer" the angle to a first quadrant angle with a congruent reference triangle.
Reference angles will be important when we need to solve trigonometric equations. There will always be two angles with the same trig ratio (except for quadrantal angles), and they will have the same reference angle.
We can construct reference triangles for angles in any of the four quadrants, and the trig ratios of the angle are the same as the trig ratios of its reference angle, up to sign. Here is how to construct a reference triangle for an angle :
The figure below shows angles \(\theta\) between \(0\degree\) and \(360\degree\text{,}\) and the reference angle, \(\widetilde{\theta}\text{,}\) for each. Study the figures, and make sure you understand the formula for finding the reference angle in each quadrant.
Use your calculator to find the sine and cosine of \(56\degree\text{,}\) rounded to two decimal places. Label the sides of the reference triangle with their lengths.
Generalize: All four of your angles have the same reference angle, \(56\degree\text{.}\) For each quadrant, write a formula for the angle whose reference angle is \(\theta\text{.}\)
Sketch \(200\degree\) and its reference angle in standard position, along with their reference triangles. Verify that both angles have the same trigonometric ratios, up to sign.
Both angles are shown at right. Note that the reference triangle for \(200\degree\) is congruent to the reference triangle for \(20\degree\text{.}\) You can use your calculator to verify the following values.
Sketch \(285\degree\) and its reference angle in standard position, along with their reference triangles. Verify that both angles have the same trigonometric ratios, up to sign.
The trigonometric ratios of any angle are equal to the ratios of its reference angle, except for sign. The sign of the ratio is determined by the quadrant.
Any acute angle \(\theta\) is the reference angle for four angles between \(0\degree\) and \(360\degree\text{,}\) one in each quadrant. The figure below shows the four angles in standard position whose reference angle is \(35\degree\text{.}\) Note that each angle is found by measuring \(35\degree\) from the \(x\)-axis in the appropriate quadrant, and that the four angles together make a βbow-tieβ shape.
One of the angles we want is \(\cos^{-1}\left(\dfrac{5}{8}\right)\text{.}\) Use your calculator to find the first quadrant angle, \(51.3\degree\text{.}\) The cosine is also positive in the fourth quadrant, so we look for the angle in the fourth quadrant with reference angle \(51.3\degree\text{.}\) That angle is \(360\degree - 51.3\degree = 308.7\degree\text{,}\) as shown at right.
Because the cosine is negative in the second and third quadrants, we would like angles \(\theta\) in those quadrants whose reference angle is \(\widetilde{\theta} = 51.3\degree\text{.}\) In the second quadrant, we find
\(\tan^{-1}(3.66) = 74.7\degree\text{.}\) The angle in the third quadrant with reference angle \(74.7\degree\) is \(180 \degree + 74.7 \degree = 254.7\degree\)
The tangent is negative in the second and fourth quadrants, and the angles in those quadrants with reference angle \(74.7\degree\) are \(105.3\degree\) and \(285.3\degree\)
Recall that the angles \(30\degree,~45\degree\) and \(60\degree\) are called the special angles because we can express the exact values of their trigonometric ratios in terms of radicals. There are special angles in all four quadrants; namely, those whose reference angles are \(30\degree,~45\degree\) and \(60\degree\text{.}\)
Alternatively, consider the reference triangle in the figure at right, where \(r = 2\text{.}\) Because the sides of a 30-60-90 triangle are in the ratio \(1:\sqrt{3}:2\text{,}\) the point \(P\) has coordinates \((-\sqrt{3}, -1)\text{.}\) Using the definitions of the trig ratios, we can calculate the values above.
All of the special angles are shown at right. In the Homework Problems you will calculate the three trigonometric ratios for all the special angles, and it will be useful to be familiar with these values, and be able to calculate them quickly. You may want to review the two "special triangles" in Section 2.3.
Because \(360\degree\) represents one complete revolution, we can add or subtract a multiple of \(360\degree\) to any angle, and the terminal side will arrive at the same position. For example, the angles \(70\degree\) and \(430\degree\) have the same terminal side because \(430\degree = 70\degree + 360\degree\text{.}\) Such angles are called coterminal.
The angle \(790\degree\) is also coterminal with \(70\degree\text{,}\) because if we add two revolutions to \(70\degree\text{,}\) we get \(~790\degree = 70\degree+ 2(360\degree)\text{,}\) as shown below.
Because coterminal angles have the same standard position, their trigonometric ratios are equal. For example, you can verify that, to four decimal places,
If the direction of rotation is important, we let positive angles represent rotation in the counter-clockwise direction, and negative angles represent rotation in the clockwise direction. For example, the angle \(-60\degree\) shown at right lies in the fourth quadrant. It is coterminal with \(-60\degree + 360\degree = 300\degree\text{.}\)
We can use angles to describe rotation. Positive angles indicate rotation in the counter-clockwise direction; negative angles describe clockwise rotation.
We define the trigonometric ratios of any angle by placing the angle in standard position and choosing a point on the terminal side, with \(r = \sqrt{x^2 + y^2}\text{.}\)
The Trigonometric Ratios.
If \(\theta\) is an angle in standard position, and \((x,y)\) is a point on its terminal side, with \(r = \sqrt{x^2 + y^2}\text{,}\) then
The trigonometric ratios of any angle are equal to the ratios of its reference angle, except for sign. The sign of the ratio is determined by the quadrant.
For Problems 35β40, find three angles between \(90\degree\) and \(360\degree\) with the given reference angle, and sketch all four angles on the same grid.
Explain why the definitions of the trigonometric ratios for a third-quadrant angle (between \(180\degree\) and \(270\degree\)) are independent of the point \(P\) chosen on the terminal side. Illustrate with a figure.
Explain why the definitions of the trigonometric ratios for a fourth-quadrant angle (between \(270\degree\) and \(360\degree\)) are independent of the point \(P\) chosen on the terminal side. Illustrate with a figure.