Skip to main content

Section 4.12 Hex Data & Colors

Hexadecimal is used to display large binary values for people to read. Although all data is stored as binary, for many pieces of data a computer works with, the 1s and 0s have a meaning defined by their data type; the computer interprets a sequence of 1s and 0s as a signed integer, or an ASCII character, or a floating-point decimal. However, some pieces of information do not have a natural type. Things like memory addresses in a computer are just binary sequences (00000, 00001, etc…). When a computer has to display data that does not have a “type” or for which the type is unknown, the raw information is typically shown in hexadecimal.
A programmer’s view of two pieces of information in a program.
Figure 4.12.1.
The image above shows a screenshot of looking at data while debugging a computer program. x is known to be an integer (int) - so the bits that store its value (00000000000000000000000000000111) are interpreted as the decimal number 7. memory_address is a memory address for an unknown type (void *) - so its bits (001010001111111010111000) are displayed in hex as 28feb8.
The first place many people encounter hexadecimal is learning about specifying colors for websites. Colors are generally specified as 24-bit numbers - 8 bits each to represent how much red, green, and blue. These 8 bits are enough to give values of \({0-255}_{10}\) (\({00000000-11111111}_{2}\)) for each of the three primary colors. To make different colors, we mix different amounts of the three primaries. 255 red, 0 green, and 140 blue makes a nice pink. To specify this color, a website designer can write the 24 binary digits as 6 hex digits (remember that 4 binary digits correspond to one hex digit). 255 is FF in hex. 0 is 00 in hex. 140 is 8C in hex. So this shade of pink can be written as FF008C - a website designer would type something like “color: #FF008D;” to specify that some text should be pink.
You can play with the sliders below to explore how colors can be described as a mix of red, green, and blue. Move the sliders to change the amount of each color. The current value is displayed in both decimal and hexadecimal. By writing the hex digits for each color as one 6-digit number (red/green/blue), you can determine the hex code for the color - which is shown below the color swatch.
Hex color code:

Checkpoint 4.12.2.

    Which of the following hex values describes a smoky-aqua color?
  • A255A2
  • Try reproducing the color with the tool above
  • 58B3B3
  • 43C0C0
  • Try reproducing the color with the tool above
  • 777777
  • Try reproducing the color with the tool above

Checkpoint 4.12.3.

What hex code specifies black?
You have attempted of activities on this page.